Range (Roll angle ± 180 °, pitch angle ± 90 °, azimuth angle ± 180 °)
Dynamic accuracy: ± 0.1 °
Resolution 0.01 °
DC 9~36V wide voltage input
Wide temperature operation -40~+ 85 ℃
High anti-vibration performance> 2000g
IP67 protection level
Product Description
Scope of application
Parameter
Dimensions
DownloadHDA536T A new generation of digital MEMS dynamic tilt sensor launched by RION Technology. It can measure the attitude parameters (roll, pitch, and azimuth) of a moving carrier, and suitable for tilt angle measurement under motion or vibration.HDA436T has a built-in high-precision acceleration and gyro sensor, and integrates the Carman filter algorithm, which can measure the real-time motion data of the carrier under motion or vibration. The product has dual CAN (CAN2.0A / CAN2.0B) mode, which is highly scalable.
This product adopts the non-contact measurement principle, can output the current attitude and inclination in real time, is easy to use, and does not need to be installed on two surfaces with relative changes. High-precision AD and gyro units are integrated inside, which can compensate for nonlinearity, orthogonal coupling, temperature drift and centrifugal acceleration in real time, greatly eliminate the centrifugal error caused by motion acceleration interference, improve the dynamic measurement accuracy of products, and adapt to work in complex motion scenes and harsh environments for a long time. The product is a dynamic and static dual-mode measurement sensor, which has strong ability to resist external electromagnetic interference and is an ideal choice for industrial automation control and measurement posture.
| HDA536T-C2/C3 | CONDITION | INDEX |
| Measure range | | Roll ± 180 °, pitch ± 90 °, azimuth ± 180 ° (initial value at power-down is 0 °) |
| Measure axis | | X axis / Y axis / Z axis |
| Resolution | | 0.01° |
| Static accuracy | @25℃ | ± 0.05° |
| Dynamic accuracy | @25℃ | ± 0.1° |
| Bias Instability (Allan) | | 8°/h |
| Zero point temp. coefficient | -40～85℃ | ±0.01°/℃ |
| Sensitivity temp. coefficient | -40～85℃ | ≤100ppm/℃ |
| Power-on startup time | 1S | |
| Response time | 0.01S | |
| Output signal | CAN2.0A/CAN2.0B | |
| Electromagnetic compatibility | According to EN61000 and GBT17626 | |
| MTBF | ≥98000 hours / time | |
| Insulation resistance | ≥100 Megohm | |
| Impact resistance | 100g @ 11ms, Triaxial and identical (half sine wave) | |
| Anti-vibration | 10grms、10～1000Hz | |
| Waterproof level | IP67 | |
| Cable | Standard unwired, optional 2m M12 aviation plug with PVC unshielded cable | |
| Weight | Single connector≤165g/ double connector ≤180g(excluding cable) | |
L72×W47×H22.5mm
L64×W39×H6.5mm
4 M4 screws
* Please contact the online sales engineer to obtain the product specification of Rion, or email sales@rion-tech.net to obtain it.
Copyright © RION TECHNOLOGY
